antistatic-esd-solutions

Latest Posts by antistatic-esd-solutions

I wonder... Why do manufacturers and suppliers of ESD materials have such a PANIC FEAR from ESD Auditors? Je me demande.... Pourquoi les fournisseurs et fabricants de matériaux ESD ont-ils une telle peur panique des auditeurs ESD? Ich wundere mich.... Warum haben Lieferanten und Hersteller von ESD-Materialien solche Panikangst vor ESD-Auditoren? Merak ediyorum .... ESD Tedarikçileri ve Üreticileri ESD Denetçilerinden Neden Bu Kadar Panik Kaygısı Yaşıyor? Me pregunto...... ¿Por qué los proveedores y fabricantes de materiales ESD tienen tanto MIEDO DE PÁNICO a los auditores de ESD? Ik vraag mij af… Waarom hebben leveranciers en producenten van ESD materialen zo'n PANISCHE ANGST van ESD Auditoren? https://www.instagram.com/p/CD6eBQnhvAY/?igshid=uecquy4g97bo

ESD Corner Workstation AES Oscar | Electric Height Adjustable | VC-E & VC Linear Module 1800 x 800 mm + 1600 x 800 mm https://www.antistatic-esd-solutions.com/en/ESD-Corner-Workstation-AES-Oscar-Electric-Height-Adjustable-VC-E-VC-Linear-Module-1800-x-800-mm-Knurr-Vertiv-Workstations-Electronic-Elicon-Consoles.html https://www.instagram.com/p/CDwRCf-BRdN/?igshid=c8p6uxwaccm0

ESD Test & Measurement Equipment

ESD Test & Measurement Equipment to perform ESD Audits are necessary to have insight and Static Control on ESD-sensitive Products.

https://www.antistatic-esd-solutions.com/en/ESD-Test-Measurement-Equipment-ESD-Audit-Static-Control-Products-.htm

Coronavirus COVID-19 Medical Mouth Masks

Surgical face mask with 3-layer earloop N95 - FFP2

https://www.esdproducts.eu/en/news/p/detail/coronavirus-covid-19-medical-mouth-masks-surgical-face-mask-with-3-layer-earloop-n95-ffp2

Masques buccaux médicaux

Contre le coronavirus COVID-19 - Masque chirurgical avec boucle d'oreille à 3 couches N95 - FFP2

https://www.esdproducts.eu/fr/nouvelles/p/detail/masques-buccaux-meacutedicaux-contre-le-coronavirus-covid-19-masque-chirurgical-avec-boucle-d039oreille-agrave-3-couches-n95-ffp2

Medische mondmaskers en chirurgisch gezichtsmasker

 COVID-19 Bescherming tegen het Coronavirus 3-laags met oorlus N95 - FFP2

https://www.esdproducts.eu/nl/nieuws/p/detail/medische-mondmaskers-en-chirurgisch-gezichtsmasker-covid-19-bescherming-tegen-het-coronavirus-3-laags-met-oorlus-n95-ffp2

Chaise de jeux ESD

Nous offrons des chaises de jeu exclusives dans notre webshop. Ces chaises vous évitent les chocs statiques pendant les jeux. Nous offrons une garantie de 10 ans sur toutes nos chaises de jeu. Découvrez-les maintenant sur le lien ci-dessous! 

https://www.antistatic-esd-solutions.com/products/product.php?pid=57092

Gaming Chair ESD Neon

We offer exclusive gaming chairs in our webshop. The chairs prevent you from getting static shocks during gaming and much more. We offer a 10-year warranty on all our gaming chairs. Check them out now on the link below! 

https://www.antistatic-esd-solutions.com/en/24-7-chair-24-hours-chairs-Racing-Office-Chair-Static-Free-Game-Chairs-Without-Electrical-Shock-Computer-Seats-Anti-Static-Neon-ESD.html

Chaises de bureau Anti Statiques

Avez-vous déjà découvert nos chaises de bureau libres de statique? Si non, cliquez sur le lien ci-dessous. Ces chaises vous évitent de recevoir des chocs statiques au travail ou à la maison. Il prévient également la Lipoatrophia Semicircularis.

https://www.antistatic-esd-solutions.com/categories/category_welcome.php?cid=743

Anti Static Office Chairs

Have you discovered our unique static free office chairs yet? If not, click on the link below. The chairs prevent you from getting static shocks at work or at home. It also prevents Lipoatrophia Semicircularis.

https://www.antistatic-esd-solutions.com/en/ESD-Office-Chairs-STATIC-FREE-gaming-chairs-conductive-floor-mat.htm

ESD Access Control System

Check our ESD Access Control System now! The Access Control System keeps unauthorized people away from your ESD Safe Zone. https://www.antistatic-esd-solutions.com/en/ESD-Access-Control-System-EPA-Access-Control-System---ESD-Products.htm

ESD Vacuum Cleaners | ESD Cleaning Products

Have you checked our ESD Safe vacuum cleaners yet? Never clean your PC or other electronic devices with a normal vacuum cleaner. It will damage your devices. Protect your Static sensitive products and devices now!

https://www.antistatic-esd-solutions.com/en/Antistatic-ESD-vacuum-Cleaner-Cleaning-ESD-maintenance-vacuum-cleaners-ESD-blowVac-ESDproducts-Muntz-Antistatic-Agents.htm

Ergonomic Table Armrest ESD Anti-Static AES

Remember the Women Who Made #Apollo50th Possible

As the world celebrates the 50th anniversary of the historic Moon landing, we remember some of the women whose hard work and ingenuity made it possible. The women featured here represent just a small fraction of the enormous contributions made by women during the Apollo era. 

Margaret Hamilton, Computer Programmer

Margaret Hamilton led the team that developed the building blocks of software engineering — a term that she coined herself. Her systems approach to the Apollo software development and insistence on rigorous testing was critical to the success of Apollo. In fact, the Apollo guidance software was so robust that no software bugs were found on any crewed Apollo missions, and it was adapted for use in Skylab, the Space Shuttle and the first digital fly-by-wire systems in aircraft.

In this photo, Hamilton stands next to a stack of Apollo Guidance Computer source code. As she noted, “There was no second chance. We all knew that.”

Katherine Johnson, Aerospace Technologist

As a very young girl, Katherine Johnson loved to count things. She counted everything, from the number of steps she took to get to the road to the number of forks and plates she washed when doing the dishes.

As an adult, Johnson became a “human computer” for the National Advisory Committee for Aeronautics, which in 1958, became NASA. Her calculations were crucial to syncing Apollo’s Lunar Lander with the Moon-orbiting Command and Service Module. “I went to work every day for 33 years happy. Never did I get up and say I don’t want to go to work.“

Judy Sullivan, Biomedical Engineer

This fabulous flip belongs to biomedical engineer Judy Sullivan, who monitored the vital signs of the Apollo 11 astronauts throughout their spaceflight training via small sensors attached to their bodies. On July 16, 1969, she was the only woman in the suit lab as the team helped Neil Armstrong suit up for launch.

Sullivan appeared on the game show “To Tell the Truth,” in which a celebrity panel had to guess which of the female contestants was a biomedical engineer. Her choice to wear a short, ruffled skirt stumped everyone and won her a $500 prize. In this photo, Sullivan monitors a console during a training exercise for the first lunar landing mission.

Billie Robertson, Mathematician

Billie Robertson, pictured here in 1972 running a real-time go-no-go simulation for the Apollo 17 mission, originally intended to become a math teacher. Instead, she worked with the Army Ballistic Missile Agency, which later became rolled into NASA. She created the manual for running computer models that were used to simulate launches for the Apollo, Skylab and Apollo Soyuz Test Project programs. 

Robertson regularly visited local schools over the course of her career, empowering young women to pursue careers in STEM and aerospace.

Mary Jackson, Aeronautical Engineer

In 1958, Mary Jackson became NASA’s first African-American female engineer. Her engineering specialty was the extremely complex field of boundary layer effects on aerospace vehicles at supersonic speeds.

In the 1970s, Jackson helped the students at Hampton’s King Street Community center build their own wind tunnel and use it to conduct experiments. “We have to do something like this to get them interested in science,” she said for the local newspaper. “Sometimes they are not aware of the number of black scientists, and don’t even know of the career opportunities until it is too late.”

Ethel Heinecke Bauer, Aerospace Engineer

After watching the launch of Sputnik in October 1957, Ethel Heinecke Bauer changed her major to mathematics. Over her 32 years at NASA, she worked at two different centers in mathematics, aerospace engineering, development and more. 

Bauer planned the lunar trajectories for the Apollo program including the ‘free return’ trajectory which allowed for a safe return in the event of a systems failure  — a trajectory used on Apollo 13, as well as the first three Apollo flights to the Moon. In the above photo, Bauer works on trajectories with the help of an orbital model.

Follow Women@NASA for more stories like this one, and make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

#ESD #Workstations #Electric in #height-adjustable #Antistatic ESD Solutions

Pretty convenient that a lot of American students never learn that Einstein was a Jew who came to America and started the nuclear research after fleeing from the Nazis and having most of his research lost in the book burnings. 

Or how much of his life and work was shaped by his autism, like how it was his biggest asset because it allowed him to think differently, but also his biggest hurtle because of all the abuse he received in school from teachers who labeled him as a dunce and told him he was stupid because of his disability. Which he proved wrong by discovering the theory of relativity because of his autism instead of in spite of it.

EVEN THOUGH THOSE ARE THE TWO MOST RELEVANT DETAILS OF HIS LIFE THAT EXPLAIN HOW AND WHY HE DID ALMOST EVERYTHING HE DID. But nah, Im sure diversity wasn’t relevant enough to be important in this situation.

Its almost like we have a biased school system that censors the accomplishments of marginalized groups to stop them from realizing that people like them have accomplished things.

Our inspirationsource

Nikola Tesla Shares His Lifetime’s Work and Discoveries on 81st Birthday

“At the close of 1889, having worked one year in the shops of George Westinghouse, Pittsburgh, I experienced so great a longing for resuming my interrupted investigations that, notwithstanding a very tempting proposition by him, I left for New York to take up my laboratory work, but owing to pressing demands by several foreign scientific societies I made a trip to Europe where I lectured before the Institution of Electrical Engineers and Royal Institution of London and the Societe de Physique in Paris. After this and a brief visit to my home in Yugoslavia I returned to this country in 1892 eager to devote myself to the subject of predilection on my thoughts: the study of the universe.

"During the succeeding two years of intense concentration I was fortunate enough to make two far-reaching discoveries. The first was a Dynamic Theory of Gravity, which I have worked out in all details and hope to give to the world very soon. It explains the causes of this force and the motions of heavenly bodies under its influence so satisfactorily that it will put an end to idle speculations and false conceptions, as that of curved space. According to the relativists, space has a tendency to curvature owing to an inherent property or presence of celestial bodies. Granting a semblance of reality to this fantastic idea, it is still self-contradictory. Every action is accompanied by an equivalent reaction and the effects of the latter are directly opposite to those of the former. Supposing that the bodies act upon the surrounding space causing curvature of the same, it appears to my simple mind that the curved spaces must react on the bodies and, producing the opposite effects, straighten out the curves, Since action and reaction are coexistent, it follows that the supposed curvature of space is entirely impossible. But even if it existed it would not explain the motions of the bodies as observed. Only the existence of a field of force can account for them and its assumption dispenses with space curvature. All literature on this subject is futile and destined to oblivion. So are also all attempts to explain the workings of the universe without recognizing the existence of the ether and the indispensable function it plays in the phenomena.

"My second discovery was a physical truth of the greatest importance. As I have searched the scientific records in more than half dozen languages for a long time without finding the least anticipation, I consider myself the original discoverer of this truth, which can be expressed by the statement: There is no energy in matter other than that received from the environment. On my 79th birthday I made a brief reference to it, but its meaning and significance have become clearer to me since then. It applies rigorously to molecules and atoms as well as the largest heavenly bodies, and to all matter in the universe in any phase of its existence from its very formation to its ultimate disintegration.

"Being perfectly satisfied that all energy in matter is drawn from the environment, it was quite natural that when radioactivity was discovered in 1896. I immediately started a search for the external agent which caused it. The existence of radioactivity was positive proof of the existence of external rays. I had previously investigated various terrestrial disturbances affecting wireless circuits but none of them or any others emanating from the earth could produce a steady sustained action and I was driven to the conclusion that the activating rays were of cosmic origin. This fact I announced in my papers on Roentgen rays and Radiations contributed to the Electrical Review of New York, in 1897. However, as radioactivity was observed equally well in other widely separated parts of the world, it was obvious that the rays must be impinging on the earth from all directions. Now, of all bodies in the cosmos, our sun was most likely to furnish a clue as to their origin and character. Before the electron theory was advanced, I had established that radioactive rays consisted of particles of primary matter not further decomposable, and the first question to answer was whether the sun is charged to a sufficiently high potential to produce the effects noted. This called for a prolonged investigation which culminated in my finding that the sun’s potential was 216 billions of volts and that all such large and hot heavenly bodies emit cosmic rays. Through further solar research and observation of Novae this has been proved conclusively, and to deny it would be like denying the light and heat of the sun. Nevertheless, there are still some doubters who prefer to shroud the cosmic rays in deep mystery. I am sure that this is not true for there is no place where such a process occurs in this or any other universe beyond our ken.

"A few words will be sufficient in support of this contention. The kinetic and potential energy of a body is the result of motion and determined by the product of its mass and the square of velocity. Let the mass be reduced, the energy is diminished in the same proportion. If it be reduced to zero the energy is likewise zero for any finite velocity. In other words, it is absolutely impossible to convert mass into energy. It would be different if there were forces in nature capable of imparting to a mass infinite velocity. Then the product of zero mass with the square of infinite velocity would represent infinite energy. But we know that there are no such forces and the idea that mass is convertible into energy is rank nonsense.

"While the origin and character of the rays observed near the earth’s surface are sufficiently well ascertained, the so-called cosmic rays observed at great altitudes presented a riddle for more than 26 years, chiefly because it was found that they increased with altitude at a rapid rate. My investigations have brought out the astonishing fact that the effects at high altitudes are of an entirely different nature, having no relation whatever to cosmic rays. These are particles of matter projected from celestial bodies at very high temperature and charged to enormous electrical potentials. The effects at great elevations, on the other hand, are due to waves of extremely small lengths produced by the sun in a certain region in the atmosphere. This is the discovery which I wish to make known. The process involved in the generation of the waves is the following: The sun projects charged particles constituting an electric current which passes through a conducting stratum of the atmosphere approximately 10 kilometers thick enveloping the earth. This is a transmission of energy exactly as I illustrated in my experimental lectures in which one end of a wire is connected to an electric generator of high potential, its other end being free. In this case the generator is represented by the sun and the wire by the conducting air. The passage of the solar current involves the transference of electric charges from particle to particle with the speed of light, thus resulting in the production of extremely short and penetrating waves. As the air stratum mentioned is the source of the waves it follows that the so-called cosmic rays observed at great altitudes must increase as this stratum is approached. My researches and calculations have brought to light the following facts in this connection:

(1) the intensity of the so-called cosmic rays must be greatest in the zenithal portion of atmosphere;

(2) the intensity should increase more and more rapidly up to an elevation of about 20 kilometers where the conducting air stratum begins;

(3) from there on the intensity should fall, first slowly and then more rapidly, to an insignificant value at an altitude of about 30 kilometers;

(4) the display of high potential must occur on the free end of the terrestrial wire, that is to say, on the side turned away from the sun. The current from the latter is supplied at a pressure of about 216 billion volts and there is a difference of 2 billion volts between the illuminated and the dark side of the globe. The energy of this current is so great that it readily accounts for the aurora and other phenomena observed in the atmosphere and at the earth’s surface.

"For the time being I must content myself with the announcement of the salient facts, but in due course I expect to be able to give more or less accurate technical data relating to all particulars of this discovery.

"To go to another subject, I have devoted much of my time during the year to the perfecting of a new small and compact apparatus by which energy in considerable amounts can now be flashed through interstellar space to any distance without the slightest dispersion, I had in mind to confer with my friend George E. Hale, the great astronomer and solar expert, regarding the possible use of this invention in connection with his own researches. In the meantime, however, I am expecting to put before the Institute of France an accurate description of the devices with data and calculations and claim the Pierre Guzman Prize of 100,000 francs for means of communication with other worlds, feeling perfectly sure that it will be awarded to me. The money, of course, is a trifling consideration, but for the great historical honor of being the first to achieve this miracle I would be almost willing to give my life.

"My most important invention from a practical point of view is a new form of tube with apparatus for its operation. In 1896 I brought out a high potential targetless tube which I operated successfully with potentials up to 4 million volts from ‘96 to ‘98. This device was adopted by many imitators and with slight modifications it is employed even now in all research laboratories and scientific institutions here and in other countries, and virtually all atomic investigations are carried on with it. At a later period I managed to produce very much higher potentials up to 18 million volts, and then I encountered unsurmountable difficulties which convinced me that it was necessary to invent an entirely different form of tube in order to carry out successfully certain ideas I had conceived. This task I found far more difficult than I had expected, not so much in the construction as in the operation of the tube. For many years I was baffled in my efforts, although I made a steady slow progress. Finally though, I was rewarded with complete success and I produced a tube which it will be hard to improve further. It is of ideal simplicity, not subject to wear and can be operated at any potential, however high, that can be produced. It will carry heavy currents, transform any amount of energy within practical limits, and it permits easy control and regulation of the same. I expect that this invention, when it becomes known, will be universally adopted in preference to other forms of tubes, and that it will be the means of obtaining results undreamed of before. Among others, it will enable the production of cheap radium substitutes in any desired quantity and will be, in general, immensely more effective in the smashing of atoms and the transmutation of matter. I am hopeful that it will be possible by its use to carry out a process in which there should be no misses whatever, but only hits. However, this tube will not open up a way to utilize atomic or subatomic energy for power purposes. According to the physical truth I have discovered there is no available energy in atomic structure, and even if there were any, the input will always greatly exceed the output, precluding profitable, practical use of the liberated energy.

"Some papers have reported that I had promised to give a full description of my tube and its accessories on the present occasion. This has caused me a considerable annoyance–as, owing to some obligations I have undertaken regarding the application of the tube for important purposes, I am unable to make a complete disclosure now. But as soon as I am relieved of these obligations a technical description of the device and of all the apparatus will be given to scientific institutions.

"There is one more discovery which I want to announce at this time, consisting of a new method and apparatus for the obtainment of vacua exceeding many times the highest heretofore realized. I think that as much as one-billionth of a micron can be attained. What may be accomplished by means of such vacua is a matter of conjecture, but it is obvious that they will make possible the production of much more intense effects in electron tubes. My ideas regarding the electron are at variance with those generally entertained. I hold that it is a relatively large body carrying a surface charge and not an elementary unit. When such an electron leaves an electrode of extremely high potential and in very high vacuum, it carries an electrostatic charge many times greater than the normal. This may astonish some of those who think that the particle has the same charge in the tube and outside of it in the air. A beautiful and instructive experiment has been contrived by me showing that such is not the case, for as soon as the particle gets out into the atmosphere it becomes a blazing star owing to the escape of the excess charge.

"The great quantity of electricity stored on the particle is responsible for the difficulties encountered in the operation of certain tubes and the rapid deterioration of the same.”

–Nikola Tesla

“Dynamic Theory of Gravity.” July 10, 1937 (Prior to interviews with the press on his 81st birthday observance).

ESD Workspace Analysis, ESD Training, ESD Support, ESD Workspace Analysis; EPA-ESD Protected Area; control ESD workspace; ESD supplier; ESD standardization; ESD guidelines; internal quality ESD audits; Bruno Depre; AES; Antistatic ESD Solutions; ESDproducts; AES

antistatic esd flooring Static Protective ESD Flooring coatings puzzle tiles Epoxy Rubber Anti Fatigue Mats

Antistatic ESD Workbench Alliance Automatic "Lisboa" "The Alliance "Lisboa " workstation has an adjustable, variable working height between 600 mm and 1600 mm. Loading capacity is 150 kg. Includes the following parts: * The Alliance automatic workstation (AL/A) is supplied in a set with a lower slat, perforated panel, main shelf lighting and power panel. ESD Version (1200 x 700 mm) Colour: RAL 7035 Type: AL/A-12

Tesla Coil:

*Method of transformation of electrical energy by oscillatory condenser discharge. It was predicted that this apparatus afforded vast possibilities and would play an important part in the future.*

“This type of apparatus is identified with my name as certain as the law of gravitation is with that of Newton. I know that some have claimed that Professor Thomson also invented the so-called Tesla coil, but those feeble chirps ne'er went beyond Swampscott. Professor Thomson is an odd sort of man; very ingenious, but he never was a wireless expert; he never could be. Moreover, it is important to realize that this principle is universally employed everywhere. The greatest men of science have told me that this was my best achievement and, in connection with this apparatus I may say that a lot of liberties have been taken. For instance, a man fills this space [break D] with hydrogen; he employs all my instrumentalities, everything that is necessary, but calls it a new wireless system – the Poulsen arc. I cannot stop it. Another man puts in here [referring to space between self-inductive lines L L] a kind of gap – he gets a Nobel prize for doing it. My name is not mentioned. Still another man inserts here [conductor B] a mercury[-arc] rectifier. That is my friend Cooper Hewitt. But, as a matter of fact, those devices have nothing to do with the performance.

“If these men knew what I do, they would not touch my arrangements; they would leave my apparatus as it is. Marconi puts in here [break D] two wheels. I showed only one wheel; he shows two. And he says, “See what happens when the wheels are rotated; a wonderful thing happens!” What is the wonderful thing? Why, when the teeth of the wheels pass one another, the currents are broken and interrupted. That is the wonderful thing that happens? The Lord himself could not make anything else happen unless he broke his own laws. So, in this way, invention has been degraded, debased, prostituted, more in connection with my apparatus than in anything else. Not a vestige of invention as a creative effort is in the thousands of arrangements that you see under the name of other people – not a vestige of invention. It is exactly like in car couplings on which 6,000 patents have been taken out; but all the couplings are constructed and operated exactly the same way. The inventive effort involved is about the same as that of which a 30-year-old mule is capable. This is a fact.

“This is one of the most beautiful things ever produced in the way of apparatus: I take a generator of any kind. With the generator I charge a condensing. Then I discharged to condenser under conditions which result in the production of vibrations. Now, it was no sense Lord Kelvin that the condenser this charge would give this vibration, but I perfected my apparatus to such a degree that it became an instrument utilizable in the arts, In a much broader way than Lord Kelvin had contemplated as possible. In fact, years afterwards when Lord Kelvin honored me by presenting to the British Association one of my oscillators of a perfected form, he said that it was "a wonderful development and destined to be of great importance.”

–Nikola Tesla

(Tesla explaining his wireless art in a pre-hearing interview with his legal counsel in 1916 to protect his radio patents from the Guglielmo Marconi and the Marconi Company.)

“Nikola Tesla On His Works With Alternating Currents and Their Application to Wireless Telegraphy, and Transmission of Power.” Twenty First Century Books, Breckenridge, Colorado, 2002.

ESD Floor Coatings, ESD Floor Paint, ESD Floor Coatings, Anti-static-ESD-paint, AntiStatic-ESD-Floor-Coatings, AES, ESD floor finish, anti static floor finish, conductive floor finish, ESD Floor Paint, static free floor, static electricity, sparks from electrostatic discharges, color paint, colour floor paint

antistatic esd flooring Static Protective ESD Flooring coatings puzzle tiles Epoxy Rubber Anti Fatigue Mats

ESD Workspace Analysis, ESD Training, ESD Support, ESD Workspace Analysis; EPA-ESD Protected Area; control ESD workspace; ESD supplier; ESD standardization; ESD guidelines; internal quality ESD audits; Bruno Depre; AES; Antistatic ESD Solutions; ESDproducts; AES

ESD Support,  ESD Training, ESD Support; ESD prevention; ESD advice; independent ESD guidance; control of static electricity; ESD specialist; Bruno Depre; Electrostatic Discharge; ESD, esdpartner; esd consult; esd advice; ESD safe products; ESD Support

ESD Training, ESD Course, ESD Knowledge Center, ESDproducts, AES,#ESD Training

ESD-Training, ESD-Courses, ESD-Support, ESD-Advice, ESD-protection, ESD certificate

Protection against static electricity, ESD Motorised Workstations, Antistatic ESD Workbenches, Antistatic ESD Workstations, furnishing lab, furnishing electronics workplace, ESD Furniture

Protection against static electricity, protection against static electricity, Antistatic ESD Workbenches, Antistatic ESD Workstations, furnishing lab, furnishing electronics workplace, ESD Furniture

ESD Cleanroom Chairs, ESD cleanroom Seatings; ESD Lab Cleanroom Chairs, ESD EPA Cleanroom Chairs